Thermal Grizzly Presents the Intel Mycro Direct-Die RGB PRO V1
Thermal Grizzly Holding GmbH introduces the Intel Mycro Direct-Die RGB PRO V1, an enhanced version of the Intel Mycro Direct-Die water cooler. The Pro version not only features a new design but also offers improved cooling performance. By making changes to the microfin structure of the base plate and optimizing water flow, the Intel Mycro Direct-Die RGB PRO V1 can achieve up to 6 degrees Celsius lower processor temperatures under full load.
The cooling channel slot width on the copper base plate of the Intel Mycro Direct-Die RGB PRO V1 has been optimized to accommodate 43 percent more cooling fins compared to the standard version. A specially designed jet plate reduces flow resistance, allowing for a higher flow rate in liters per minute at the same pump speed as the Intel Mycro Direct-Die V1. This increased flow rate gives users the option to reduce noise by lowering the pump speed or to dissipate more heat at the same noise level.
Like all high-performance products from Thermal Grizzly, the Intel Mycro Direct-Die RGB PRO V1 is designed to be used with liquid metal between the CPU die and cooler for optimal heat transfer. The nickel-plated copper cooler prevents gallium-based liquid metal from diffusing into the copper, eliminating the need for multiple applications of liquid metal.
The Intel Mycro Direct-Die RGB PRO V1 features an anodized aluminum cover with RGB LED lighting beneath tempered acrylic glass. The lighting can be controlled via the 3-pin ARGB header on the mainboard. The cooler is connected to the custom water cooling circuit through input and output with G1/4-inch threads.
After milling, the acrylic glass undergoes an annealing process to relieve internal stresses, preventing stress cracks even after prolonged use. The Intel Mycro Direct-Die RGB PRO V1 can improve temperatures by up to 6 degrees Celsius, depending on factors such as ambient temperature, water cooling system configuration, and the chip itself.
The Intel Mycro Direct-Die RGB PRO V1 is now available in the Thermal Grizzly online store and from sales partners. Manufactured, assembled, and packaged at the production site in Hohen Neuendorf, Brandenburg, the Intel Mycro Direct-Die RGB PRO V1 is proudly "Made in Germany."
